Call (855) 671-4316
Water removalWater extractionStructural dryingFlood and sewage cleanup

Who should you call for water damage in the San Fernando Valley?

Short answer: Call the professional who can address the immediate hazard or stop the source: the gas company or fire department for a gas smell, an electrician or power company for electrical danger, and a plumber for an active plumbing leak. For sewage, floodwater or widespread wet materials, contact a water damage restoration company.

Who should I call first?

Choose based on the immediate danger and where the water came from. If anyone may be at risk, leave the area first and make contact from a safe place. Do not walk through standing water near downed lines, use a flame to see inside, or enter a damaged home before its structure has been checked (American Red Cross, FEMA).

  • Gas smell or hissing: leave, get far away, then contact the gas company or fire department (American Red Cross, CDC).
  • Downed power lines: stay out of puddles and standing water; report the lines to the power company (American Red Cross).
  • Water near outlets or an electrical hazard: call an electrician; do not enter water to reach a switch (CDC).
  • Cracks, loose lines or missing supports: ask a building inspector to check the home before entering (American Red Cross, CDC).
  • Broken pipe or leaking water heater: contact a licensed plumber to stop the water source.
  • Sewage, floodwater or a large wet area: contact a water damage restoration company; call the local utility about a city main or sewer issue.

Who can stop the water source?

For a broken supply line, failed fitting or leaking water heater, a licensed plumber can address the plumbing source. If water is actively running, close the house’s main water valve if you can reach it safely. Keep clear of wet outlets and cords, and take pictures of the damage while staying out of unsafe areas (CDC).

A city water main or sewer main problem is different from a private plumbing problem. Contact the local utility about the public system. In the Valley, the private sewer lateral between a home and the middle of the street is the owner’s responsibility, so ask the utility which part of the line is involved.

When should I call a restoration company?

Call a water damage restoration company when water has spread beyond a small, contained leak, soaked building materials, or come from sewage or floodwater. Contaminated water needs experienced handling. A company can assess wet areas, extract standing water, remove materials that cannot be dried, and set up controlled drying (EPA).

Act promptly: the EPA advises drying water-damaged areas and items within 24 to 48 hours to help prevent mold growth. In the San Fernando Valley, dry outdoor air does not mean moisture has left a wall cavity or the pad under a floor; indoor materials still need to be checked and dried (EPA).

How do I vet a restoration company?

Get more than one estimate and check the contractor’s license with state or county government. Be skeptical of anyone who appears in the recovery area promising immediate cleanup, pressures you to decide, or asks for cash up front. A written estimate should spell out the work, materials, price, completion date and contact details (FTC, FEMA).

  • Ask for a written contract with the contractor’s contact and license details, dates, payment schedule and promised work (FTC).
  • Read the contract before signing; never sign a blank contract, and keep a written receipt for each payment (FEMA).
  • Do not pay in cash or pay in full before the work is done; FEMA advises paying no more than half upfront (FTC, FEMA).
  • Do not choose a bid automatically because it is the lowest; compare the written scope and materials (FTC).

What is different about Valley homes?

San Fernando Valley homes can have slab floors and attic air handlers, so water may travel out of sight from where it first appears. Tell the plumber or restoration company where you noticed water and whether it followed a leak, storm or backup. Ask how the wet area will be identified and how drying will be checked.

The Valley also has earthquake-strapped water heaters. After shaking, look for a leaking tank or water line only from a safe position; if water is running, close the main valve when safe and keep out of rooms where water has reached outlets. A plumber can assess the water source, while a restoration company can address resulting wet materials (CDC).

When is it safe to enter again?

If the home is damaged, wait for a building inspector to check it before going back inside. Look over the exterior for loose power lines, damaged gas lines, foundation cracks or missing supports. On entry, use a flashlight rather than matches or another open flame, since gas may be trapped inside (CDC, American Red Cross).

Do not turn power back on until an electrician has checked the electrical system, and do not use flooded appliances until they have been checked and are completely dry. If you notice mold or a musty odor after water damage, correct the moisture problem; people with health concerns should contact a doctor (CDC, American Red Cross, EPA).

Common questions

Should I call a plumber or a restoration company first?

If water is still coming from a pipe or water heater, arrange to stop the source first. Contact a restoration company as well if water has spread into floors, walls or other materials, or if it is sewage or floodwater.

Can I enter the house to turn off the power?

Do not enter standing water to reach an electrical switch. If you can turn off power from a dry, safe location, do so; otherwise contact an electrician. Have the electrical system checked before power is turned back on.

How soon should wet materials start drying?

Aim to get water-damaged areas and belongings drying within 24 to 48 hours. If the water came from sewage or other contaminated water, contact a professional experienced with contaminated water rather than handling it as a routine leak.

More homeowner questions

Sources

Call (855) 671-4316

Last updated

Call (855) 671-4316