Call (855) 671-4316
Water removalWater extractionStructural dryingFlood and sewage cleanup

What to do when your house floods

Short answer: When water enters, protect people first: move above the water, avoid floodwater and wet electrical equipment, and shut utilities off only from a dry, safe place. After it stops, wait for clearance before reentering, document damage safely, and get extraction and drying started promptly.

While water is still coming in

Floodwater can hide debris, chemicals, and energized lines, and moving water can sweep people or cars away. Do not walk or drive through it. If trapped, go to the highest level, but stay out of a closed attic where rising water could trap you. In some San Fernando Valley homes, air handlers are in the attic; do not climb up to inspect equipment during flooding (Ready.gov, CDC).

  • Go onto the roof only if necessary, and signal for help (Ready.gov).
  • Do not touch wet electrical equipment or use it while standing in water (Ready.gov, CDC).
  • Turn off power or gas only if you can reach the controls safely, without entering water (Ready.gov, CDC).
  • If you suspect a gas leak, leave immediately; avoid switches, flames, or anything that could spark (CDC, American Red Cross).

The first hour after water stops

Once the flow stops, keep people away from wet rooms, outlets, and cords. If a leak is still active and the house valve is reachable from a dry place, turn it off. Winter storms can put a lot of water on the Valley in a short time, so a stopped leak does not mean the wet area is small. Do not delay urgent safety steps to begin cleanup (CDC).

  • If standing water blocks access to the main power switch, do not enter it; call an electrician to shut power off (CDC).
  • Keep clear of downed power lines and puddles nearby, and report fallen lines to the power company (American Red Cross, FEMA).
  • If you cannot safely inspect the home, wait for officials or qualified professionals rather than entering (CDC, Ready.gov).

Before going back inside

If you evacuated, return only when local authorities say it is safe. Check the outside first for downed lines, damaged gas lines, cracks in the foundation, or missing supports. Do not enter a home with obvious structural damage; ask a building inspector or contractor to examine it. Use a flashlight, not a match or open flame, because gas could be present (American Red Cross, FEMA).

  • If you smell gas or hear hissing, leave immediately, get well away, and contact the gas company or fire department from safety (CDC, American Red Cross).
  • Have an electrician check the electrical system before power is turned back on; equipment must be completely dry before use (CDC).
  • Keep generators and camp stoves outside, at least 20 feet from doors, windows, and vents (CDC).

Photograph damage safely

Take pictures of the water and affected areas from a safe, dry position, before moving or discarding wet materials when it is practical. Do not step into floodwater or approach electrical hazards to get a better view. If the building has not been cleared for entry, photograph only from outside; safety comes before documenting anything (FEMA).

For San Fernando Valley homes with slab floors, a dry-looking surface may not show how far water reached beneath flooring or inside walls. Record visible water marks and affected rooms, then let a restoration company assess concealed moisture with appropriate equipment. Do not remove materials or operate wet electrical devices just to expose or reach a hidden area.

Start drying within 24 to 48 hours

The EPA advises drying water-damaged areas and items within 24 to 48 hours to help prevent mold growth. Extraction, air movers, and dehumidifiers can remove water and moisture more effectively than waiting for evaporation. The EPA also recommends keeping indoor humidity below 60 percent. In a slab-floor home, ask how moisture in flooring and nearby wall materials will be checked, not just whether the surface feels dry (EPA).

Wet porous materials that cannot be fully cleaned and dried may need to be discarded. This can include soaked drywall, ceiling tiles, insulation, and other absorbent materials; FEMA advises removing soaked wallboard to a foot above the water mark. If water came from sewage or another contaminated source, contact a professional experienced with contaminated water before cleanup (EPA, FEMA).

Choose a company and check its terms

A restoration company can assess the wet area, extract standing water, remove materials that will not dry, and set up controlled drying. 818 Damage is a referral service, not a restoration company; it connects callers with an independent company for water damage restoration, extraction, drying, and flood or sewage cleanup. When calling, describe where the water came from, how far it spread, and any safety concerns.

Before hiring a contractor, confirm the license with the relevant state or county government and compare written estimates from more than one contractor. The estimate should describe the work, materials, price, completion date, and contact details. Read the written contract and check its payment schedule and promised work. Be cautious of demands for cash up front, and do not pay in full until the work is done (FTC).

  • Ask what water category the company believes applies and what cleanup steps that means.
  • Ask how drying progress will be measured and recorded, including in wall or floor materials (EPA).
  • Get the company’s work, dates, price, and payment schedule in writing before agreeing (FTC).

Common questions

Should I turn the power back on when the floor looks dry?

No. A dry-looking floor does not show that electrical equipment is safe. Have an electrician check the electrical system before restoring power, and do not use appliances until they are completely dry.

Can I use a generator in my garage?

No. Keep generators outside, at least 20 feet from windows, doors, and vents. Never run one inside a home, basement, or garage.

Can I dry everything myself?

Small areas may be manageable, but the EPA recommends following its remediation guidance for moldy areas larger than about 10 square feet or extensive water damage. For sewage or other contaminated water, call a professional experienced with contaminated water.

More homeowner questions

Sources

Call (855) 671-4316

Last updated

Call (855) 671-4316